When Airstone was first introduced to the market, I still remember my excitement. It was so lifelike and lightweight, and so easy to use. I thought, « I’m going to put this stuff over everything! »
My wife was able to restrain my enthusiasm and the whole house was covered with faux stone.
Although it might seem daunting at first, Airstone is very easy to use.
What You’ll Need
Airstone was designed for DIYers, so it is easy to install without the need for a lot of tools. These are the tools you’ll need to complete the task.
- Interior adhesive by Airstone
- Putty knife
- Hacksaw
- Safety glasses
- Facemask
- You will need something a little different if you want to install Airstone outdoors.
Loctite construction adhesive (Airstone recommends Loctite-PL construction adhesive).
- Putty knife
- Hacksaw
- Work gloves
- Safety glasses
- Facemask
Because they are so easy to use, I recommend using a hacksaw to cut your Airstone. A hacksaw is probably already in your possession, but if not, you can get one at a discount. If you’re looking for something more powerful, a jigsaw, or even a circular, will do the job quickly. Just make sure you have a masonry blade.
Step 1: Measure The Room
The first thing you need to do is purchase the right amount of adhesive and Airstone. Measure the area you are covering and account for windows and other places where Airstone will not be placed.
Each box of primary Airstones measures eight feet in area, while each box contains six feet of corner/finished Airstones.
Airstone can help you determine what dimensions to use if you’re not confident in your measurements. Send them a picture of your project with the dimensions required and a description.
One tub of Airstone interior adhesive will cover 30 square feet. Loctite PL is used for exterior projects. It covers 7-10 square footage.
Step II: Begin With The Corners
Start with the corners. This is the easiest way to tackle any project. The corner/finished stones from Airstones have a clever design that creates beautiful corners every time.
Each box of corner/finished stone contains two shrink-wrapped sets of two stones. These stones are identical to one another. One stone has a flat edge while the other stone has a finished, rounded edge.
These stones should be joined around each corner. To create an offset seam, alternate which wall has the finished edge and which one gets the flat edge.
For attaching the stones to the wall, rub a thick coating of adhesive on the stone’s backside and then press it firmly against the wall. Continue this process until all corners are covered.
Notice: Each stone box contains four colors. To create a natural look, pay attention to the number of stones in each box.
Step 3: Attach Flat Stones
After you have finished your corners, you can begin the main part of your project by laying the primary wall stones.
You should carefully unpack all stones in the box, paying attention to how many you have of each color and length. To create a natural look, make sure you alternate the lengths and colors.
Begin at the base of the wall and work your way up. To set each stone in place, apply a thick coating of adhesive to its back. To give the wall a clean appearance, you can apply a finished edge stone to the wall.
Step IV: The Cutting
You will need to cut a few stones to make the stones fit your wall when installing the flat stones. The easiest way to cut Airstone is to do it as you go. When you have reached the desired area, mark it with the Airstone.
Next, use a hacksaw, or power saw to make your cut. Continue attaching stones to the wall. Wear eye protection and a mask whenever you are cutting.
The Final Word
After learning the basics of cutting Airstone, you will be able quickly to start your next home improvement project. Airstone is the easiest method to bring the beauty and elegance of natural stone into your home. This FAQ page can be a great resource if you have any questions.
